 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NL17SZ14 Single Inverter with Schmitt Trigger The NL17SZ14 is a single inverter with Schmitt trigger in two tiny footprint packages. The device performs much as LCX multi-gate products in speed and drive. Features http://onsemi.com MARKING DIAGRAMS * * * * * * * Tiny SOT-353 and SOT-553 Packages Source/Sink 24 mA at 3.0 V Over-Voltage Tolerant Inputs and Outputs Pin For Pin with NC7SZ14 Designed for 1.65 V to 5.5 V VCC Operation Chip Complexity: FET = 20 Pb-Free Packages are Available SOT-353/SC70-5/SC-88A DF SUFFIX CASE 419A LA M G G M NC 1 5 VCC SOT-553 XV5 SUFFIX CASE 463B LA MG G IN A 2 GND 3 4 OUT Y Figure 1. Pinout LA = Device Code M = Date Code* A = Assembly Location Y = Year W = Work Week G = Pb-Free Package (Note: Microdot may be in either location) *Date Code orientation and/or position may vary depending upon manufacturing location. IN A 1 Figure 2. Logic Symbol OUT Y PIN ASSIGNMENT 1 2 3 4 5 NC IN A GND OUT Y VCC A Input L H Y Output H L ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet. (c) Semiconductor Components Industries, LLC, 2005 1 December, 2005 - Rev. 7 Publication Order Number: NL17SZ14/D NL17SZ14 MAXIMUM RATINGS Symbol VCC VI VO IIK IOK IO ICC IGND TSTG PD qJA TL TJ MSL FR ESD DC Supply Voltage DC Input Voltage DC Output Voltage DC Input Diode Current DC Output Diode Current DC Output Sink Current DC Supply Current per Supply Pin DC Ground Current per Ground Pin Storage Temperature Range Power Dissipation in Still Air Thermal Resistance Lead Temperature, 1 mm from Case for 10 Seconds Junction Temperature under Bias Moisture Sensitivity Flammability Rating ESD Classification Oxygen Index: 28 to 34 Human Body Model (Note 2) Machine Model (Note 3) Charged Device Model (Note 4) SOT-353 SOT-553 SOT-353 SOT-553 Output in High or LOW State (Note 1) VI < GND VO < GND Characteristics Value *0.5 to )7.0 *0.5 VI )7.0 *0.5 VO 7.0 *50 *50 $50 $100 $100 *65 to )150 186 135 350 496 260 )150 Level 1 UL 94 V-0 @ 0.125 in Class 2 Class C N/A Unit V V V mA mA mA mA mA C mW C/W C C Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. Measured with minimum pad spacing on an FR4 board, using 10 mm-by-1 inch, 2-ounce copper trace with no air flow. 2. Tested to EIA/JESD22-A114-A, rated to EIA/JESD22-A114-B. 3. Tested to EIA/JESD22-A115-A, rated to EIA/JESD22-A115-A. 4. Tested to JESD22-C101-A. RECOMMENDED OPERATING CONDITIONS Symbol VCC VI VO TA Dt/DV Supply Voltage Input Voltage Output Voltage Operating Free-Air Temperature Input Transition Rise or Fall Rate VCC = 2.5 V $0.2 V VCC = 3.0 V $0.3 V VCC = 5.0 V $0.5 V (High or LOW State) Parameter Operating Data Retention Only Min 1.65 1.5 0 0 *40 0 0 0 Max 5.5 5.5 5.5 5.5 )85 No Limit No Limit No Limit Unit V V V C ns/V http://onsemi.com 2 NL17SZ14 DC ELECTRICAL CHARACTERISTICS VCC (V) 1.65 2.3 2.7 3.0 4.5 5.5 VT* Negative Input Threshold Voltage 1.65 2.3 2.7 3.0 4.5 5.5 VH Input Hysteresis Voltage 1.65 2.3 2.7 3.0 4.5 5.5 VOH High-Level Output Voltage VIN = VIH or VIL IOH = -100 mA IOH = -3 mA IOH = *8 mA IOH = *12 mA IOH = *16 mA IOH = *24 mA IOH = *32 mA VOL Low-Level Output Voltage VIN = VIH or VIL IOL = 100 mA IOL = 4 mA IOL = 8 mA IOL = 12 mA IOL = 16 mA IOL = 24 mA IOL = 32 mA IIN IOFF ICC Input Leakage Current Power Off-Output Leakage Current Quiescent Supply Current VIN = VCC or GND VOUT = 5.5 V VIN = VCC or GND 1.65 to 5.5 1.65 2.3 2.7 3.0 3.0 4.5 1.65 to 5.5 1.65 2.3 2.7 3.0 3.0 4.5 0 to 5.5 0 5.5 TA = 25C Min 0.6 1.0 1.2 1.3 1.9 2.2 0.2 0.4 0.5 0.6 1.0 1.2 0.1 0.25 0.3 0.4 0.6 0.7 VCC - 0.1 1.29 1.9 2.2 2.4 2.3 3.8 Typ 1.0 1.5 1.7 1.9 2.7 3.3 0.5 0.75 0.87 1.0 1.5 1.9 0.48 0.75 0.83 0.93 1.2 1.4 VCC 1.52 2.1 2.4 2.7 2.5 4.0 0.0 0.08 0.2 0.22 0.28 0.38 0.42 0.1 0.24 0.3 0.4 0.4 0.55 0.55 $0.1 1 1 Max 1.4 1.8 2.0 2.2 3.1 3.6 0.8 1.15 1.4 1.5 2.0 2.3 0.9 1.1 1.15 1.2 1.5 1.7 *40C TA 85C Min 0.6 1.0 1.2 1.3 1.9 2.2 0.2 0.4 0.5 0.6 1.0 1.2 0.1 0.25 0.3 0.4 0.6 0.7 VCC - 0.1 1.29 1.9 2.2 2.4 2.3 3.8 0.1 0.24 0.3 0.4 0.4 0.55 0.55 $1.0 10 10 mA mA mA V Max 1.4 1.8 2.0 2.2 3.1 3.6 0.8 1.15 1.4 1.5 2.0 2.3 0.9 1.1 1.15 1.2 1.5 1.7 V V V Unit V Symbol VT) Parameter Positive Input Threshold Voltage Condition http://onsemi.com 3 NL17SZ14 AC ELECTRICAL CHARACTERISTICS tR = tF = 3.0 ns Symbol tPLH tPHL Parameter Propagation Delay (Figure 3 and 4) Condition RL = 1 MW, CL = 15 pF VCC (V) 1.65 1.8 2.5 $ 0.2 3.3 $ 0.3 5.0 $ 0.5 3.3 $ 0.3 5.0 $ 0.5 TA = 255C Min 2.0 2.0 1.0 1.0 0.5 1.5 0.8 Typ 9.1 7.6 5.0 3.7 3.1 4.4 3.7 Max 15 12.5 9.0 6.3 5.2 7.2 5.9 *405C v TA v 855C Min 2.0 2.0 1.0 1.0 0.5 1.5 0.8 Max 15.6 13 9.5 6.5 5.5 7.5 6.2 Unit ns RL = 500 W, CL = 50 pF CAPACITIVE CHARACTERISTICS Symbol CIN CPD Input Capacitance Power Dissipation Capacitance (Note 5) Parameter Condition VCC = 5.5 V, VI = 0 V or VCC 10 MHz, VCC = 3.3 V, VI = 0 V or VCC 10 MHz, VCC = 5.5 V, VI = 0 V or VCC Typical u4.0 25 30 Unit pF pF 5. CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC(OPR) = CPD VCC fin + ICC. CPD is used to determine the no-load dynamic power consumption; PD = CPD VCC2 fin + ICC VCC. A or B 50% GND tPLH Y tPHL INPUT RL CL VCC OUTPUT 50% VCC A 1-MHz square input wave is recommended for propagation delay tests. Figure 3. Switching Waveform Figure 4. Test Circuit DEVICE ORDERING INFORMATION Device Order Number NL17SZ14DFT2 NL17SZ14DFT2G NL17SZ14XV5T2 NL17SZ14XV5T2G Package Type SOT-353/SC70-5/SC-88A SOT-353/SC70-5/SC-88A (Pb-Free) SOT-553* SOT-553* Tape and Reel Size 3000 / Tape & Reel 3000 / Tape & Reel 3000 / Tape & Reel 3000 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *All Devices in Package SOT553 are Inherently Pb-Free. http://onsemi.com 4 NL17SZ14 PACKAGE DIMENSIONS SC-88A, SOT-353, SC-70 CASE 419A-02 ISSUE J A G NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 419A-01 OBSOLETE. NEW STANDARD 419A-02. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. 5 4 S 1 2 3 -B- DIM A B C D G H J K N S D 5 PL 0.2 (0.008) M B M N J C INCHES MIN MAX 0.071 0.087 0.045 0.053 0.031 0.043 0.004 0.012 0.026 BSC --- 0.004 0.004 0.010 0.004 0.012 0.008 REF 0.079 0.087 MILLIMETERS MIN MAX 1.80 2.20 1.15 1.35 0.80 1.10 0.10 0.30 0.65 BSC --- 0.10 0.10 0.25 0.10 0.30 0.20 REF 2.00 2.20 H K SOLDERING FOOTPRINT* 0.50 0.0197 0.65 0.025 0.65 0.025 0.40 0.0157 mm inches 1.9 0.0748 SCALE 20:1 *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 5 NL17SZ14 PACKAGE DIMENSIONS SOT-553, 5 LEAD CASE 463B-01 ISSUE B D -X- A L 4 5 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. DIM A b c D E e L HE MILLIMETERS NOM MAX 0.55 0.60 0.22 0.27 0.13 0.18 1.60 1.70 1.20 1.30 0.50 BSC 0.10 0.20 0.30 1.50 1.60 1.70 MIN 0.50 0.17 0.08 1.50 1.10 MIN 0.020 0.007 0.003 0.059 0.043 INCHES NOM 0.022 0.009 0.005 0.063 0.047 0.020 BSC 0.004 0.008 0.059 0.063 MAX 0.024 0.011 0.007 0.067 0.051 0.012 0.067 1 2 3 E -Y- HE e b 5 PL 0.08 (0.003) c M XY SOLDERING FOOTPRINT* 0.3 0.0118 0.45 0.0177 1.0 0.0394 1.35 0.0531 0.5 0.5 0.0197 0.0197 SCALE 20:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800-282-9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Phone: 81-3-5773-3850 Email: orderlit@onsemi.com ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. http://onsemi.com 6 NL17SZ14/D |
Price & Availability of NL17SZ1405
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |